NAC2001-Hxx
Noliac ACtuator (NAC), based on actuator no. 2001, height in mm (Hxx)
NAC2001 is one of Noliac's plate actuators, which can be stacked according to customers' needs. Noliac's plate stacks are typically used when a medium displacement at high force is required. Noliac's plate stacks are stacks of cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution linear movement at high force.
Noliac's plates are manufactured with ceramic layer thickness down to 20 µm as standard in order to allow very low operating voltage for full performance of the piezo material. Noliac's plate stacks are mostly made to customer specifications, but a wide range of parts is available from stock as well.
Search for the specific actuator you need
Product facts:
|
Value: |
Tolerance: |
|
|
|
| Length/outer diameter |
2 mm |
+0.3/-0.1 mm |
| Width/inner diameter |
2 mm |
+0.3/-0.1 mm |
Width max/ Outer diameter max
(including bus wire and solder material, no wire)
|
3.8 mm |
max |
Height
(see table below)
|
4 - 20 mm |
+/-0.2 mm or +/-1%* |
| Operating voltage |
60 V |
|
| Free stroke |
2.5-22.2 µm |
+/-15% |
| Blocking force |
168 N |
+/-20% |
| Capacitance |
140-1300 nF |
+/-15% |
| Stiffness |
70-8 N/µm |
+/-20% |
| Maximum operating temperature |
150 °C |
|
| Curie temperature |
340 °C |
|
| Material |
NCE51 |
|
| Unloaded resonance frequency |
>248k->52k Hz |
free-free, thickness mode |
| External electrodes |
Ag |
| Wires |
Optional |
* Whichever is largest
For stacks higher than 10mm, it may be necessary to add a support within theapplication in order to avoid bending and buckling during mounting and operation.
Stack options:
| Height |
Stroke |
Capacitance |
| 4 mm |
2.2 µm |
130 nF |
| 6 mm |
4.4 µm |
260 nF |
| 8 mm |
6.6 µm |
380 nF |
| 10 mm |
8.8 µm |
510 nF |
| 12 mm |
11 µm |
640 nF |
| 14 mm |
13.3 µm |
760 nF |
| 16 mm |
15.5 µm |
890 nF |
| 18 mm |
17.7 µm |
1000 nF |
| 20 mm |
19.9 µm |
1150 nF |
Please specify height when asking for a quote
Typical outline:
The figure below shows typical outline of Noliac's plate stacks
|
Symbol
|
Parameter
|
Unit
|
|
L
|
Length
|
mm
|
|
W
|
Width
|
mm
|
|
WM
|
Width max (including bus wire and solder material, no wire) |
mm
|
|
H
|
Height
|
mm
|
Wire selection guide
Piezo materials
Blocking force & free stroke
Capacitance
Curie Temperature
All technical information of this document is not contractual and can be changed without prior notice.
Make this page your favourite
Recommend this page
Print
