Your Piezo Partner

News 2015

Noliac piezo benders in space
16 December 2015
Noliac piezo benders in space
On December 3, the European Space Agency (ESA) successfully launched the LISA Pathfinder from Europe's spaceport in Kourou, French Guiana. Noliac’s piezo bender rings make a small, but vital...
Noliac supporting the distributor in China
09 December 2015
Noliac supporting the distributor in China
A sales representative from Noliac recently visited the distributor in China, Harbin Core Tomorrow Science and Technology Co., Ltd., to show appreciation of the good work and to hold a training course...
Extended specifications for Noliac’s piezo drivers
10 December 2015
Extended specifications for Noliac’s piezo drivers
Noliac has added extended specifications for each piezo driver on the website. All relevant information to drive the Noliac actuators correctly is also on the website.
Successful annual ISO 9001:2008 audit
07 December 2015
Successful annual ISO 9001:2008 audit
Noliac’s quality management system, ISO 9001:2008, has been successfully audited by DNV GL. One of the areas highlighted at the audit was the significant reduction of claims from 2014 to 2015.
Prelaunch: A non-magnetic piezo motor for low-power applications
24 November 2015
Prelaunch: A non-magnetic piezo motor for low-power applications
Noliac has developed a new generation of piezo motors based on the unique actuator drive (PAD) technology. This generation of the PAD motor is non-magnetic, low-powered and can achieve open-loop...
Christmas competition 2015
24 November 2015
Christmas competition 2015
Noliac wishes you a Merry Christmas, and invites you and your colleagues to participate in our competition for piezos from Noliac worth €200.00. A correct answer gives you one lot!
Product launch: Shear stack XYZ and extended range of shear plates
16 November 2015
Product launch: Shear stack XYZ and extended range of shear plates
Noliac launches shear stack XYZ, a multi-axis shear stack actuator with active XYZ axes. The lateral motion of the product is due to the piezoelectric shear effect. The shear stack XYZ is a very...
Thickest piezo plate component yet
09 November 2015
Thickest piezo plate component yet
Noliac expands the production capabilities and offers the thickest piezo plate components to date.
Noliac is attending Productronica November 12
04 November 2015
Noliac is attending Productronica November 12
Noliac will attend the trade fair Productronica in Munich, Germany, November 12. Meet Noliac and talk piezo solutions to your challenges on electronics development and production.
Noliac is visiting MEDICA and COMPAMED November 16-17
02 November 2015
Noliac is visiting MEDICA and COMPAMED November 16-17
Noliac will visit the exhibitions MEDICA and COMPAMED in Düsseldorf, Germany, to discuss piezo solutions for your next health care device. Book a meeting now.
Should you choose a piezo motor for your next application? Sign up for our free webinar and find out
30 October 2015
Should you choose a piezo motor for your next application? Sign up for our free webinar and find out
Noliac is hosting the free webinar “Motor devices” November 17 about piezo motors. The webinar introduces to the basics of piezo motors, and will also explain the advantages of different piezo motor...
High interest for Noliac products at ILOPE 2015 in Beijing, China
27 October 2015
High interest for Noliac products at ILOPE 2015 in Beijing, China
Noliac’s products were on display at the International Lasers, Optoelectronics and Photonics Exhibition (ILOPE) October 14-16 in Beijing, China. The visitors showed high interest in Noliac’s actuators...
Product launch: strain gauge for piezo actuators
19 October 2015
Product launch: strain gauge for piezo actuators
Noliac launches strain gauges for piezo actuators. This is an add-on used to ensure linearization of displacement response and compensate for creep and hysteresis. The strain gauge can be fitted to...
Noliac is attending the Fakuma international trade fair October 13-14
08 October 2015
Noliac is attending the Fakuma international trade fair October 13-14
You can meet Noliac at Fakuma international trade fair for plastics processing in Friedrichshafen, Germany October 13-14.
Do you know about piezo actuators for dynamic applications? Sign up for our free webinar!
30 September 2015
Do you know about piezo actuators for dynamic applications? Sign up for our free webinar!
On October 29, you can get a live introduction to piezo actuators for dynamic applications. Learn the basics of dynamic applications, the Mason model and the important calculations you should know.
Noliac’s products on display at ILOPE 2015 in Beijing, China
22 September 2015
Noliac’s products on display at ILOPE 2015 in Beijing, China
October 14-16 you can see, feel and learn more about a selection of Noliac’s piezo actuators and piezo components at the 20th International Lasers, Optoelectronics and Photonics Exhibition (ILOPE) in...
Meet Noliac at the International Engineering Fair (MSV) September 15
10 September 2015
Meet Noliac at the International Engineering Fair (MSV) September 15
Noliac will attend the International Engineering Fair (MSV) in Brno, Czech Republic, September 15. The fair is the leading industrial trade fair in Central Europe.
Largest piezo components to date from Noliac
09 September 2015
Largest piezo components to date from Noliac
Noliac has expanded the ranges for piezo components to the largest sizes to date in the shapes of discs, rings and plates. The expanded ranges will give our customers even better possibilities to...
Noliac is granted a new patent for the PAD
04 September 2015
Noliac is granted a new patent for the PAD
Noliac’s R&D department is working on new versions of the piezo motor Piezo Actuator Drive (PAD). A result of this work is a new patent granted for a “wobble motor with a solid state actuator”.
Successful ISO audit at Noliac Ceramics
03 September 2015
Successful ISO audit at Noliac Ceramics
Noliac’s production facilities in the Czech Republic, Noliac Ceramics, have been audited successfully for a renewal of the ISO certificate for the next three years.
Long range micropositioning
02 September 2015
Long range micropositioning
Piezos are used for long range micropositioning. Long range micropositioning is cost effective and can be used for both R&D and industrial purposes. Long range micropositioners are capable of both...
Do you know how to select the right piezo actuator? Sign up for our free webinar on actuators now!
24 August 2015
Do you know how to select the right piezo actuator? Sign up for our free webinar on actuators now!
Get a live introduction to the basics of piezo actuators September 24. Learn about the different actuator designs, and how to select the right actuator for your application.
Short delivery time and small quantities
20 August 2015
Short delivery time and small quantities
Noliac aims to be the preferred piezo partner and we offer our customers the best service available. We offer market leading order possibilities with a short delivery time, and the possibility to...
Valuable input at IWPMA 2015
03 July 2015
Valuable input at IWPMA 2015
Noliac attended the IWPMA 2015 in Vilnius, Lithuania, and our three representatives enjoyed the many interesting lectures at the conference. In addition, Noliac senior R&D engineer Charles Mangeot...
Piezo technology course with Heinmade held in the Netherlands October 8
03 July 2015
Piezo technology course with Heinmade held in the Netherlands October 8
Noliac distributor Heinmade is hosting a one-day piezo technology course in collaboration with Noliac. The course will be held in Veldhoven in the Netherlands October 8.
Size matters – even with piezo components! Noliac expands the range of dimensions
02 July 2015
Size matters – even with piezo components! Noliac expands the range of dimensions
When you work with piezo-based applications, you need a supplier that can produce your piezo components to match your specific requirements. Some applications need very large piezo components, others...
Great impressions from Laser World of Photonics 2015
30 June 2015
Great impressions from Laser World of Photonics 2015
Noliac returned with great impressions, updates on new photonics products and new contacts from the visit to the trade fair Laser World of Photonics 2015, which had more than 30,000 visitors.
Free webinar on piezoceramic materials August 25. Book your seat now!
30 June 2015
Free webinar on piezoceramic materials August 25. Book your seat now!
Do you know all there is to know about piezoceramic materials? At Noliac’s free webinar August 25, you can get a live introduction to the basics of piezoceramic materials. Book your seat now!
Hear Noliac at IWPMA 2015
18 June 2015
Hear Noliac at IWPMA 2015
At IWPMA 2015 in Vilnius, Lithuania, Noliac senior R&D engineer Charles Mangeot will hold a presentation describing how to choose the right piezoelectric material for off-resonance actuator...
Book a meeting with Noliac at Laser World of Photonics June 23-24
17 June 2015
Book a meeting with Noliac at Laser World of Photonics June 23-24
Noliac will visit the trade fair Laser World of Photonics in Munich, Germany, June 23-24. Book a meeting with our sales representative to discuss your next piezo product.
Six reasons why Noliac is your photonics piezo partner
04 June 2015
Six reasons why Noliac is your photonics piezo partner
Noliac is proud to be a long-term piezo partner for companies working with photonics and optical technologies, supplying high quality piezo actuators to top manufacturers. There are six basic reasons...
Do you know about piezo motors? Join our free webinar May 27th 2015
12 May 2015
Do you know about piezo motors? Join our free webinar May 27th 2015
At our free webinar Motor devices on Wednesday May 27th, you will learn about the different piezo motor designs, how they perform and how to select a piezo motor to match your specific requirement.
Noliac at ocean technology and medical exhibitions in April
30 April 2015
Noliac at ocean technology and medical exhibitions in April
Representatives from Noliac attended leading industry exhibitions for inspiration and networking during April. Ocean technology and health care are among the strategic focus areas for Noliac, and...
Exchanging expertise with universities
24 April 2015
Exchanging expertise with universities
Noliac has invited Steffen Lapp from the University of the West of Scotland to join Noliac’s R&D department in Denmark for a six-month period. He will apply his knowledge of piezo and electrics to...
Piezos in health care
13 April 2015
Piezos in health care
Many variants of monolayer and multilayer piezos are used in the health care industry, and even though the piezo might not be the dominant technology, it is a crucial part of several tools.
Welcome to Noliac’s new website!
31 March 2015
Welcome to Noliac’s new website!
We are happy to invite you to our new and improved website. A custom designed website, where it is easier to learn about piezo technology and Noliac’s high quality products.
Three steps with significant impact
10 March 2015
Three steps with significant impact
Piezo actuators and components are used in a vast number of piezo devices from ultrasonic surgical devices and nanopositioning equipment to distance measurement transducers for air and liquids,...
Product launch: New material for high power applications
26 February 2015
Product launch: New material for high power applications
Noliac has developed a new, hard doped piezo ceramic material, NCE81, for high power applications such as ultrasonic welding. The material has extremely high mechanical quality and extremely low...
Tubes with OD up to 150mm and plates up to 135mm x 135mm
18 February 2015
Tubes with OD up to 150mm and plates up to 135mm x 135mm
Noliac offers a high degree of product customization, and we are continuously extending our manufacturing capabilities in accordance with customer requirements. We tailor your piezo component...
Piezo 2015 - conference in Maribor, Slovenia
25 January 2015
Piezo 2015 - conference in Maribor, Slovenia
At the conference ”Piezo 2015 Electroceramics for End-users VIII” 25-28 January, Noliac senior R&D Engineer Charles Mangeot will present the key elements of his paper “Investigation of large signal...
Product launch: Adjustable piezo drivers
12 January 2015
Product launch: Adjustable piezo drivers
Noliac launches two new piezo drivers with adjustable output voltage. The drivers NDR6210 and NDR6220 are designed to work as static and dynamic power supplies of various piezoelectric actuators.
Product launch: Shear stacks, multi-axis
08 January 2015
Product launch: Shear stacks, multi-axis
Noliac now provides a wide range of multi-axis piezoelectric shear actuator stacks, which can be used in a line of standard powerful solutions dedicated to applications such as nanopositioning,...
Free webinars - new dates for 2015
07 January 2015
Free webinars - new dates for 2015
Noliac's free webinars - or online courses - were a great success i 2014. Many of the webinars have been fully booked, and the evaluations have been very positive. Therefore, we have decided to...
Highest possible rating in the annual DNV audit
05 January 2015
Highest possible rating in the annual DNV audit
DNV conducted a successful annual audit in December 2014, rewarding Noliac the highest possible rating for our quality management system. The audit acknowledges the continuous efforts carried out by...

Subscribe to our newsletter

Fields marked with a are mandatory

 Name (first and last name)
 Company or institution
 E-mail

A piezo partner - what do we mean by that

Request for quote

We give you a competitive advantage by using our extensive knowledge to customize and optimize your piezo products. Thus, we will be your long-term piezo partner. Send your request today.

First name *
Last name *
Company *
Industry *
Email *
Phone
Country *
City
Choose product
Description
Please enter the result of the equation:
7 + 8 =
Close
Request for quote

Search tool

Performance Dimensions
Value
Max operating voltage / V
Min
Min free stroke / µm
Min
Min estimated blocking force / N
Min
Min
Max
Length or outer diameter / mm
Min
Max
Width or inner diameter / mm
Min
Max
Max height / mm
Max
Product category
Choose here...
  • Plate actuators
  • Plate stacks
  • Ring actuators
  • Ring stacks
  • Plate benders
  • Ring benders
  • Shear plate actuators
  • Shear stacks
  • 2D actuators
  • High temperature stacks
  • Damage tolerant stacks
Material
Choose here...
  • NCE51
  • NCE51F
  • NCE46
  • NCE57
  • NCE40
  • NCE41
  • NCE53
  • NCE55
  • NCE56
  • NCE59
  • NCE80
  • NCE81
  • 0,00
  • AA
  • Material
  • Type
  • 0.00
Search Clear
Next

Search on Noliac